EDELRID SWITCH PRO Mode D'emploi page 14

In case of commercial use, the relevant information con-
tained in this user manual must be made available to
each user before using the product.
STORAGE, MAINTENANCE AND TRANSPORT
Storage
Store cool, dry, and protected from daylight outside
transport containers. Prevent contact with chemicals.
Maintenance (6.)
a) Clean contaminated products in hand warm water.
Rinse properly. b) Dry at room temperature, never in
dryers or near heaters/ radiators! Commercial halo-
gen-free disinfectants may be used if required.
Transport
The product must be kept away from chemicals, dirt and
mechanical damage. For this purpose, a protective bag
or special storage and transport containers should be
used.
PRODUCT LABELLING
Marking on the Switch Pro
Manufacturer: EDELRID
Manufacturer address
Model: Switch Pro ...
Material: PA, PES
Product designation: Personal lanyard according to EN
354:2010, anchor devices according to
EN 795-B:2012
Lot number
CE 0123: The identification of the notified body monitor-
ing the production of the PPE (TÜV SÜD Product Service
GmbH, Ridlerstrasse 65, 80339 München, Deutschland)
The warning message and instructions must be read
and observed
: the product may only be used by one person at a time
Max. length of lanyard in cm.
YYYY MM: Year and month of manufacture
Declaration of Conformity:
EDELRID GmbH & Co. KG herewith declares that this
article is in conformity with the essential requirements
and the relevant provisions of EU regulation 2016/425.
The original Declaration of Conformity can be download-
ed at the following site on the internet: http://www.
edelrid.com/...
Our products are made with greatest care. If you find any
justified cause for complaint, please indicate the lot
number of the product concerned.
Technical changes reserved.