Table des Matières

Publicité

VERSION STANDARD –
Remplir d'eau le réservoir (Fig. 3-A).
WSC VERSION
VERSION WSC –
Dans ce modèle, il est possible de raccorder la
machine à le réseau de distribution d'eau à
l'exclusion du réservoir, éviter de raccorder à
des réseaux d'eau avec des pressions
supérieures à 3 bar
Après avoir connecté la machine au réseau
(Fig.4-A) déplacé la molette pour «Réseau»
(Fig.4-B)
.
(Fig. 3)
3-C
Ouvrir la porte et la vanne (Fig. 5). Démarrer la
machine en appuyant sur l'interrupteur
(Fig.3-C / 4-C) et attendre jusqu'à ce que vous
voyez un jet d'eau uniforme.
Fermer la vanne et la porte et vous pouvez
procéder avec un fonctionnement normal.
MINI DF A&R

STANDARD VERSION

Fill the tank with water (Fig. 3-A).
In this model you can connect the machine to
the water mains excluding the tank, Avoid
connections to water mains with pressure
higher than 3 bar.
Once the machine is connected to the main
water (Fig.4-A) system switch the selector
(Fig.4-B) toward "WATER SYSTEM ".
3-A
18
(Fig. 4)
4-B
4-A
Open the door and open the valve (Fig. 5).
Start the machine pressing the button (Fig. 3-
C / 4-C) and wait until an evenly water jet
flows out.
Close valve and door and continue with
normal functioning.
4-C
TL127-01-01-00
25-03-2022

Publicité

Table des Matières
loading

Table des Matières