Safety Instructions; Description; Nomenclature; Monitor - Extel COMPACT Guide D'installation Et D'utilisation

1. SAFETY INSTRUCTIONS

Important!
• Please carefully read the user manual before installing or using this product.
• If you are installing this product for someone else, remember to leave the manual or a copy of it with the end
user.
Warning:
• The various items should only be disassembled by an authorised technician.
Safety precautions:
• To ensure safe operation of this system, installers, users, and technicians must follow all of the safety procedures
described in this manual.
• Specific warnings and warning symbols are given for items if necessary.
• The product must be set up according to the standards applicable in the country of installation (NFC 15100 for
France).

2. DESCRIPTION

(fig. 1)
1 •

Monitor

4 • Intercom panel and protective shield
2 • Wall bracket
3 • Adapter plug
General
This videophone is composed of an interior response station with a screen and an exterior panel with an intercom and
camera, allowing the person inside to see and communicate with a visitor outside who rings the doorbell. The system
is easy to install, with only two wires needed for all functions: the doorbell, the video feed, the intercom, and the strike
plate and automated opening controls. For effective usage, please carefully read this instruction manual.

3. NOMENCLATURE

a. Monitor
(fig. 2)
1 4" colour screen
Microphone
2
Not during communication: Intercom
3
panel preview (surveillance mode)
During communication: Starts/ends a call
In surveillance mode: initiates
4
communication
Screen off: Accesses the menu
5
Menu: OK (selection button)
In call or surveillance mode: Opens
6 electric strike plate
Menu: Left arrow
In call or surveillance mode: Opens dry
contact (gate motor drive)
7
Menu: Right arrow
Loudspeaker
8
b. Intercom panel
(fig. 3)
1. IR LED for better visibility in the dark (light not visible to the naked eye).
2. C-MOS camera lens with automatic iris.
3. Speaker: allows the person inside to be heard outside.
4. Illuminated call button (permanently lit): when a person presses this button, the doorbell rings inside. The screen
and the camera are activated.
5. Light-up name holder (automatic name holder backlighting in response to light level). To change the label in the
holder, carefully lift the plastic protector using two fingers (8 fig. 4) and slide out the label in the holder.
9
10
11
EXTEL COMPACT - ADDCOMPACT
Power supply connectors
Slave or master button: switch to be
placed left on "Master"
Intercom panel and/or secondary monitor
communication connectors
GB2