Technical Data; Intended Use; Functional Description; Charging The Battery Pack - Festool MXC Guide D'utilisation

Charger
Mains voltage (input)
Mains frequency
Charging voltage (output)
Rapid charging
Charging times for
The charger MXC is designed for charging the bat-
tery packs listed.
The charger is designed for internal use only.
Only for use with the following battery packs:
• BP-XS
[1-1]
Battery pack
[1-2]
Charger
[1-3]
LED-Display
 The battery pack is delivered partially charged.
Charge the battery pack completely before us-
ing for the first time.
To charge the battery pack, put it on the retainer

[1-2] on the charger.
To remove, pull off the charged battery pack.

4

Technical data

Charger
MXC
LiIon 1,5 Ah
120 V ~
LiIon 2,6 Ah
50/60 Hz
Permitted operating tempera-
10.8 V=
ture range
typ. 2.8 A
Temperature monitoring
Safety class

Intended use

The user will be liable for damage due to improp-
er use.

Functional description

1-1

Charging the battery pack

The LED [1-3] on the charger indicates the respec-
approx. 23 min
approx. 45 min
-10 °C to + 40 °C
via NTC-resistor
WARNING
click
1
2
MXC
/II
1-2
1-3