Before Using The Cooker Hood - CIARRA CBCS6906D Manuel De L'utilisateur Et D'installation

Before Using the Cooker Hood

COMPONENTS:
Part 1 : Wall Plug X 4
Part 2 : 4*30mm Screws X 6
Part 3 : 4*8mm Screws X 2
EN
Part 4 : Aluminum Exhaust Pipe X 1
Part 5 : Cable Ties X 2
YOU WILL BE NEEDING THESE TOOLS FOR INSTALLATION
CAUTION: Before proceeding to the installation, check if items
are missing or damaged, contact the manufacturer.
Observe all governing codes and ordinances. Have a qualified
technician install the cooker hood. It is the installer's
responsibility to comply with installation clearances specified on
the model/serial rating plate. The manufacturer declines all
responsibility for improper installation and does not accept
responsibility for appliance warranty in the event of damage
caused by incorrect installation.
1.Protective Gloves
2.Spirit Level Ruler
3.Measuring Tape
Part 6 : Installtion Manual X 1
Part 7 : 1:1 Installation Diagram X 1
Part 8 : Cooker Hood Body X 1
Part 9: Back Bracket
Part 10 : Carbon Filter X 2
(CBCF002×2)
4.Double Sided Tape or Tape
5.Cross-Head Screwdriver Set
6.Electric drill and 8mm drill
6
X 1