Publicité
"Temp. zone" button
"Function" button
"Lock/unlock" button
1.2 Single key operation
1.2.1 'Temp. Zone' key
1）This key is to select the temperature zone, and
the temperature zone changes each time the key is
pressed, with the temperature of the selected zone
displayed by digits.
2）The temperature zone selection changes through
the following cycle:
Fridge → Freezer →Fridge ;
3）Every time when settings are finished (with no
flickering any more), if the 'Temp. Zone' key is
pressed again, 'Fridge' starts flickering first.
1.2.2 'Temp.' key
1 ） Under the temperature setting state, if the
temperature zone is selected to be Fridge (with
patterns of both the left and the right fridge doors
flickering at the same time), press the 'Temp.'key,
then the two digits starts flickering, which takes
effect when the 'OK' key is pressed; and if the
temperature zone is selected to be Freezer (with
patterns of both the left and the right freezer doors
flickering at the same time and the '-'sign illuminated),
set the freezer temperature by reference to the fridge
temperature setting.
The temperature will rise by 1℃ with each key
response, which can be set in a cyclic manner.
2)
Adjustable
temperature
compartment：
Fridge compartment: 08～02;
Freezer compartment: -16～-24;
The default value for each compartment when the
refrigerator is energized for the first time:
Fridge compartment temperature is 05, and freezer
compartment temperature -18.
Fridge OFF: When the fridge temperature is set, the
temperature setting progresses through the following
cycle.
2℃→3℃→4℃→5℃→6℃→7℃→8℃→OF→2℃
('OF' represents the OFF state, and when the OF
setting takes effect, the fridge will be shut off, with no
refrigeration request.)
Fridge zone
Freezer zone
Digital temperature display
"Pure Tech Light" icon
"Fast freezing" icon
"Holiday" icon
"Eco" icon
"Temp." button
"OK" button
range
for
each
1.2.3 'Function' key
The selected functionchanges with each key response.
Function selection changes through the following
cycle:
Pure Tech Light → Quick Freezer → Holiday → Eco→
Pure Tech Light;
Every time when the function setting is finished, if
the 'Function' key is pressed again, 'Pure Tech Light'
starts flickering first.
When a function has not been set, press this key to
select the function, and then press the 'Ok' key, the
selected function is enabled.
When a function has been enabled, press this key to
select the function, and then press the OK key, the
enabled function gets exited.
1.2.4 'OK' key
Under the state of function selection or temperature
setting, the selected function or the set temperature
value comes into force when this key is pressed, with
the corresponding flickering stopped immediately.
Under the function selection or the temperature
setting state, if this key is not pressed within 5
seconds, flickering gets stopped, with the selected
function or the set temperature value invalid.
1.2.5 'Unlock' key
Under the state of keys being locked, keys can be
unlocked by holding down this key for 3s.
1.3 Key combination operation
1.3.1 Hold down the 'Unlock' key, and then press the
'Function' key for more than 3S, you can access the
parameter setup program.
1.3.2 Hold down the 'Unlock' key, and then press the
'OK' key for more than 5S, you can access the
maintenance program.
1.3.3 Hold down the 'Unlock' key, and then press the
'Temp.' key for more than 3S, you can access the
hardware self-check program.
1.4 Function program rules
1.4.1 'Quick Freeze' function
1) To enter 'Quick Freeze'
Refer to the 'Single Key Operation';
2) To exit 'Quick Freeze' (the followings refer to the
OR relationship)
Refer to 'Single Key Operation'
The 'Quick Freeze' function exits automatically when
the refrigerator total run time reaches 26 hours,
counting from the moment the quick freeze function
is enabled, with the character 'Quick Freeze' and its
icon extinguished.
When the 'Eco' function is enabled, the 'Quick Freeze'
function gets exited, with its icon extinguished.
3) When the 'Quick Freeze' function is enabled, the
freezer temperature can't be modified.
4) When the 'Quick Freeze' function gets exited, the
freezer temperature restores to its original
temperature that is set before the 'Quick Freeze'
function is enabled.
1.4.2 'Holiday' function
1) To enter 'Holiday'
Refer to 'Single key operation';
2) To exit 'Holiday' (the follows refer to the OR
relationship)
28
Publicité
