MSI A320M PRO-VD/S Manuel D'utilisateur page 6

Rear I/O Panel
PS/2
USB 2.0
LAN Port LED Status Table
Link/ Activity LED
Status Description
Off No link
Yellow Linked
Blinking Data activity
Audio 7.1-channel Configuration
To configure 7.1-channel audio, you have to connect front audio I/O module to JAUD1
connector and follow the below steps.
1. Click on the Realtek HD Audio Manager > Advanced Settings to open the dialog
below.
2. Select Mute the rear output device, when a front headphone plugged in.
3.
Plug your speakers to audio jacks on rear and front I/O panel. When you plug into
a device at an audio jack, a dialogue window will pop up asking you which device
is current connected.
6
Rear I/O Panel
DVI-D
VGA
USB 3.1 Gen1
Speed LED
Status
Off
Green
Orange
Line-in
Line-out
LAN
Mic in
Description
10 Mbps connection
100 Mbps connection
1 Gbps connection