Connections Electriques; Electrical Connections; Réglage De La Température; Temperature Settings - ItaldibiPack ECOPACK 650 Livre D'instructions

Table des Matières

Publicité

_________________________________________________________________________________________

CONNECTIONS ELECTRIQUES

Connecter la machine à un réseau selon les règles du pays d'installation
. De préférence, la connexion de la machine doit être protégée par un interrupteur automatique. N'utilisez pas d'extensions.
Les connexions électriques doivent être effectuées par le personnel
qualifié
La connexion à la terre doit être effectuée.
Après la connexion de la machine vérifier la direction de rotation du tapis. Vérifiez également la direction de rotation du ventilateur
indiquée par une flèche placée sur le dessus du capot.
Si ce n'est pas le cas, inversez deux phases dans la prise de la machine.
Le fabricant n'est pas responsable des dommages causés par l'absence de connexion à la terre de
la machine.

ELECTRICAL CONNECTIONS

Connect the machine to your mains electricity supply following the norms of the country where the machine is
installed and the plate specifications.
Preferably the machine should be connected to a circuit breaker, and preferably no extension leads should be
used.
A qualified technician should verify that all electrical connections have been carried out correctly.
Use a socket provided with earth connection, do not use matchers.
Having connected the machine to the mains power supply, turns on the main on/off switch on the control panel,
and check that the rotation of conveyor is correct and to fan motor to.
The conveyor belt has to run towards the discharging rollers (the parcel must be carried to the exit of the tunnel),
and the tunnel fan has to turn in the direction of the arrow.
If they are running incorrectly, reverse any two of the three phase wires in the machine plug.
The supplier won't liable for damages occurring from a lack of earth connection.
RÉGLAGE DE LA TEMPÉRATURE
Tournez le bouton thermostat pour qu'il corresponde à la valeur souhaitée avec le repère.

TEMPERATURE SETTINGS

Turn the thermostat handle in the way that the mark stops on the agreeded temperature.
-6-

Publicité

Table des Matières
loading

Table des Matières