Sharp PN-ZB03PC Manuel D'utilisation page 7

• You cannot confi gure settings when you want to turn on the unit at the specifi ed time
while keeping the host display in the power standby state, or when you want to turn on the
unit via the network.
• To turn on / off the power of the host display and the PC Controller unit, please set
"CONTROL ROUTE" of "Communication settings" in the host display to" OPTION ". For details
on control, refer to the instruction manual of the host display.
You can also change the settings with a control command.
Function Command Direction
Control route
○： When "Power save mode" is "ON", it cannot be used in the power standby state.
※ When the control route is "OPTION", "Power save mode" cannot be set to "ON".
• When the setting of the control route is "OPTION" and the linked OFF setting is "ON", you
cannot control via the mini OPS PC Controller Board when the host display is in the power
standby mode or in the signal standby mode.
If the host display needs to be controlled via the PC Controler Board even in power standby
or signal standby mode, set the linked OFF setting to "OFF".
■ Setting and operating the display
• By executing "POWER OPERATION", "FORCED POWER OFF", "RESET" in "OPTION POWER
CONTROL" of the host display, it is possible to turn on / off the unit.
• You can also perform settings and operations with control commands.
Function Command Direction
Linked power off
Power control
○ ： When "Power save mode" is "ON", it cannot be used in the power standby state.
： Regardless of the setting of "Power save mode", it cannot be used in standby mode.
−
• When this unit is installed, "OPTION" is not displayed in the following menu.
- "HDMI auto wide" on the main unit setting menu
- "Auto input switching priority order" in other menu
• The following settings on the special function menu cannot be used when this machine is
installed.
POWER button, external controller input terminal
If "PBTN" or "PCIP" is used for the control command, "ERR" is returned.
Parameter
CTCH WR
Parameter
CCOP WR
CPOW W
Response
0 - 1 0 - 1 0：Monitor, 1：OPTION
Response Control/response detail
0 - 1 0 - 1 0：Disabled, 1：Enabled
0000 Turn off
0001 Turn on
5555 Force turning off
9999 Reset
Control/response detail
○
−
○
7