Priority; Support - Atlantis NetMaster F8PoE Mode D'emploi

5.2 Priority

This function will help to protect the system when the system power was over
loaded, the system will disable PoE function of the lower priority PoE port to
maintain the power budget to the PoE port which is in high priority.
The total power resource of the system is 30 watt sharing to the 4 POE ports
(maximum power for per port is 15.4 watt), when the POE PD shared the power
resource for over 30 watt, the system will automatically arrange the priority of
these ports, the low port number will have the higher priority than the high port
number, Port 1 > Port 2 > Port 3 > Port 4.
For example: In this POE Switch, Port 2 is using power with 7 watt, Port 3 is using
power with 15.4 watt, these two ports are totally using 22.4 watt power, when
there is an additional POE PD inserted to Port 1 with 15.4 watt, that means the
system power resource was over current, then the priority function will activate, the
priority will set to the lowest port number then to highest port number, so Port 1
will have the 15.4 watt power, Port 2 will have 7 watt power, and the system will
cut off the power transmitting to the Port 3 due to over current.

6. Support

For technical questions and support, please contact our help-desk by ticket on
http://www.atlantis-land.com/ita/supporto.php.
For generic informations, please send an e-mail to info@atlantis-land.com
.
For presales informations, please send an e-mail to prevendite@atlantis-land.com.
Atlantis
Via S. Antonio, 8/10
20020 Lainate (MI)
Fax: +39.02.78.62.64.39
Website: http://www.atlantis-land.com
Email: info@atlantis-land.com
29