Rear Panel - Atlantis NetMaster F8PoE Mode D'emploi

PoE MAX
10/100 Link/ACT

4.2 Rear Panel

PORTS
PoE Ports (1-4)
On: When the system was connected to POE PD
and the power resource remain <=7.5W, the
LED lights on, the system will not provide power
to the additional POE PD inserted.
Off: When the system have enough power of
>7.5W.
Link/ACT: When the 10M LED lights on, the
respective port is successfully connected to 10M
Ethernet network.
100M: When the 100M LED lights on, the
respective port is successfully connected to
100M Fast Ethernet network. Otherwise, when
the 100M
transmitting or receiving data on the Fast
Ethernet network.
Off: No Link.
These ports are PoE Enabled ports, the PoE port will
automatically activated when a compatible terminal is
identified, the Switch will supply power through the
Ethernet port to the connected PoE device.
For the Legacy devices that are not yet compatible,
the PoE port will not offer the power to this device.
This feature allows users to freely and safely mix
legacy and Power over LAN compatible devices on
their network
27
LED is blinking,
MEANING
the port is