Assembly Installation; Floor Mounting; Wall Mounting; Ceiling Mounting - Speedaire 437J24A Mode D'emploi

ASSEMBLY INSTALLATION

1 Unpack and inspect reel for any damage. Turn the reel by hand to check whether the reel is
operating smoothly or not.
2 If user wants to install the reel higher than the normal height, disassemble the hose stopper
and adjust to the height.
3
the reel can be damaged because the hose can be retracted by spring tension.
4 If the reel is installed to the ceiling or the wall, install a secondary safety support rope
as a safety backup system.
Typical mounting position
Figure 2
Figure 3
Figure 4
4

Floor Mounting

When the reel is mounted to the floor, it should
be mounted correctly.
If the hose is taken out when the reel is not
mounted correctly, the reel can fall down and become damaged.

Wall Mounting

When the reel is mounted to the wall, it should
be mounted correctly.
If the hose is taken out when the reel is not mounted correctly, the reel
can fall down and become damaged. The user can also be injured.

Ceiling Mounting

When the reel is mounted to the ceiling, it should
be mounted correctly.
If the hose is taken out when the reel is not mounted correctly, the reel
can fall down and become damaged. The user can also be injured.