Important Safeguards; Polarized Plug - Black & Decker Home MiniPro MFP200T Mode D'emploi

MFP200T 1/18/07 8:03 AM Page 2

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be
followed, including the following.
❑ Read all instructions.
❑ To protect against risk of electrical shock, do not put base, cord, or plug
in water or other liquid.
❑ Close supervision is necessary when any appliance is used by or near
children.
❑ Unplug from outlet when not in use, before putting on or taking off parts,
and before cleaning.
❑ Avoid contacting moving parts.
❑ Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions or is dropped or damaged in any manner.
❑ Return the appliance to the nearest authorized service facility for
examination, repair, or electrical or mechanical adjustment. Or, call the
appropriate toll-free number listed on the cover of this manual.
❑ The use of attachments not recommended or sold by the appliance
manufacturer may cause fire, electric shock, or injury.
❑ Do not use outdoors.
❑ Do not let cord hang over edge of table or counter.
❑ Keep hands and utensils away from moving blades or discs while
processing food to prevent the possibility of severe personal injury or
damage to the food processor. A scraper may be used, but it must be used
only when the food processor is not running.
❑ Blades are sharp. Handle carefully.
❑ To reduce the risk of injury, never place cutting blade or discs on base
without first putting bowl properly in place.
❑ Be certain cover is securely locked in place before operating appliance.
❑ Never feed food into chute by hand. Always use food pusher.
❑ Do not attempt to defeat the cover interlock mechanism.
❑ Do not use appliance for other than intended use.
SAVE THESE INSTRUCTIONS.
1
All manuals and user guides at all-guides.com

POLARIZED PLUG

This appliance has a polarized plug (one blade is wider than the other). To reduce the
risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If
the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact
a qualified electrician. Do not attempt to modify the plug in any way.
TAMPER-RESISTANT SCREW
Warning : This appliance is equipped with a tamper-resistant screw to prevent removal
of the outer cover. To reduce the risk of fire or electric shock, do not attempt to
remove the outer cover. There are no user-serviceable parts inside. Repair should be
done only by authorized service personnel.
Note: If the power supply cord is damaged, it should be replaced by qualified
personnel or in Latin America by an authorized service center.
2