Technical Data - IB RUBINETTI INDUSTRIA 800 Notice De Montage

EN

TECHNICAL DATA

Minimum dynamic pressure:_________________________________________________________0.5 bar
Maximum operational pressure:________________________________________________________5 bar
Recommended operational pressure:_________________________________________________1-5 bar
It's recommended to use a pressure reducer in case of
static pressure superior than 5 bar inside the waterpipe.
Maximum hot water temperature:_______________________________________________________80°C
INSTALLATION, MAINTENANCE AND PRELIMINARY CHECKING PROCEDURE
In order to get your device work correctly and fine in time, must ensure compliance with the
mode of installation and maintenance described in this booklet. Relying on a qualified plumber.
Make sure that the system is free from all debris and impurities existing.
INSTALLATION
Fig. 1: Prepare the connections 150 mm - 5.9 in apart (min 130 mm - 5.11 in, max 170 mm - 6.69
in). Screw the eccentric nuts onto the mains water supply, using PTFE or hemp to ensure a seal.
Fig. 2: Fit the flanges onto the cover nuts and screw the cover nuts onto the eccentric nuts, fi
tting the gasket.
Fig. 3: Fasten the shower arm to the upper outlet by screwing the ring nut and inserting the
gasket.
Fig. 4: Mark the holes to be drilled at the upper support. Drill the wall, insert the dowels and fix
the flange.
Fig. 5: Insert the upper support of the tube into the wall fixing system, locking it with the grub-
screw. Position the cover carter.
Fig. 6: Screw the shower head on the shower arm.
Fig. 7: Connect the hose to the lower outlet and to the hand shower. Insert the hand shower
into the holder.
After connecting the body to the system, turn on the stopcocks and check that the mixer tap
unit operates correctly. Keep the tap pressurised for a few minutes checking eventual leaks.
CLEANING
In order to obtain a correct cleanliness, exclusively wash them with soap and water, rewash and
dry them with a soft towel and deerskin. Avoid the usage of alcohol, solvents, solid or liquid
detergents which contain corrosive or acidic substances, abrasive sponges, swab with metallic
strings because they could irreversibly compromise the surfaces.
THE USAGE OF THIS KIND OF DETERGNETS DURING THE CLEANING OF THE MIXER EXCLUDE
IB RUBINETTERIE FROM ANY WARRANTY OBLIGATION.