Control Panel - Fracarro MOD-WL04 Instructions D'emploi

WL04MM, WL04MB, WL04MM2, WL04MB2 (magnetic contact), WL04SEL (siren), WL04RF (smoke detector) and WL04TC
(remote control). All the devices can be grouped up to 4 zones according to functionality, location, or a combination of both.
Each zone has its own output configurable as normally closed or double balancing (for Fracarro control panels).
In the first case only the alarm information will be communicated; in the second case, you will have all the information about
alarm and opening tamper contact of the devices associated with that zone. The interface has two additional outputs for the
signalisation of events such as "battery low", "device lost" and "tamper"; it has also three inputs dedicated to the signal of
reset smoke detectors and activation of external siren. In this way the wired control panel will completely manage all new
wireless devices.
NOTE: it's possible to connect up to 2 sirens WL04SEL or one siren and one telephone dialler.
CONNECTIONS
The MOD-WL04 interface can be used to add wireless devices of DEFENDER WL series to a wired control panel (even exist-
ing):
Connection to a wired control panel:
The same type of connection can be used with control panels having both normally closed inputs and double balancing.
WL04IR EX
WL04BL100 EX
WL04BL200 EX
Connection to a control panel with Normally closed inputs:

CONTROL PANEL

If you are connecting MOD-WL04 to a wired control panel that operates only with normally closed inputs, jumper MODE must be
removed from the module.
Using this type of connection, on the terminals related to the 4 available zones will be communicated alarm information. The output
Out2 will communicate information about lost devices and tamper of the devices and box.
LED
LED
MOD-WL04
TMPR
Sounders
BUZZER
COMM
OUT2
Jumper
MODE
LEARN RESET
Z1 Z2 Z3 Z4
Jumper
JP
OUT1
AC/DC In1 In2 In3 Z1 Z2 GND Z3 Z4
WL04GSM
Jumper
MODE
LEARN RESET
Jumper
AC/DC In1 In2 In3 Z1 Z2 GND Z3 Z4
10
WL04IR
WL04TC
WL04SEL
MOD-WL04
Z1 Z2 Z3 Z4
JP
WL04MM
WL04MB
WL04MM2
WL04MB2
WL04RF
OUT2
OUT1