HC Cargo SUPER 7" 3+1 Manuel D'utilisation page 9

CAMERA Menu
This menu set up contains the Camera and Jump setting.
CAM A MIRROR
Select "ON" to activate the mirror function for CAM A "OFF" for a normal image.
Default value is OFF.
CAM B MIRROR
Select "ON" to activate the mirror function for CAM B or "OFF" for a normal image.
Default value is OFF.
CAM R MIRROR
Select "ON" to activate the mirror function for CAM R or "OFF" for a normal image.
Default value is ON.
Jump Dwell
Setting Jump dwell value from 2~100.
Default value is "3".
Jump AV
Jump function included AV channel or not. If setting is ON but system does not work, you should
check the PARK trigger status. Default value is "ON".
RECALL
Recall factory default.
Return
Return to OSD menu selection screen.
Information
This menu set up contains the Exit
function and shows the firmware version.
Vedpak 120_Version 3_01.2018
9
160783