ThermoUp FLOOR Mode D'emploi page 34

Bring the heater to the ceiling by connecting the two parts of the
4
bracket with a thumb screw or by attaching chains to the corners
on the heater.
When mounting with the help
5
of standard brackets, you can
choose the angle of the radiant
ux of the heater.
6
To do this, slightly loosen the thumb bolts connecting
the two parts of each bracket. Set the required angle
of the instrument and x the brackets in the selected
position.
The strength of the ceiling or design for which the heaters
are mounted must be suf cient to withstand 5 times the
weight of the heater.
5x
CEILING HEATER THERMOUP TOP 700/1100/1500
Photo 4. Installation of ThermoUp Top heater
13