ThermoUp FLOOR Mode D'emploi page 22

TABLE OF CONTENTS
2
Introduction
4 Technical data
5
Safety Measures
6
Floor heater THERMOUP FLOOR/LED/LED PLUS
• Heater design
• What's included in the set
• IInstallation and connection
8
Wall heater THERMOUP WALL
• Heater design
• What's included in the set
• IInstallation and connection
11
Ceiling heater THERMOUP TOP 700/1100/1500
• Heater design
• What's included in the set
• IInstallation and connection
17
Operation, storage, and maintenance
17 Possible malfunctions and solutions
18
Warranty
19
20
Warranty Card
INCORPORATED SYMBOLS
WARNING!
CAUTION!
NOTE
• If the power cable is damaged, it must be replaced by the manufacturer,
an authorized service center or another quali ed person to avoid serious
injury.
• The heater must be installed in compliance with existing local codes and
regulations for electrical network operation.
• After installing the heater, the plug must be accessible at all times.
• The heater power class (as indicated on the nameplate) is based on tests
carried out under a speci c load.
Failure to comply with these requirements may result in severe injury or device damage.
Failure to comply with these requirements may result in severe injury or death.
• There might be typos and printing errors in the manual.
• If after reading the manual you still have questions regarding the device,
please contact the seller or a specialized service center.
• The device has a nameplate, which provides technical data as well as other
useful information about the device.