Exterior Surfaces; Control Knobs; Stainless Steel Surfaces - GE Profile PLU612 Manuel Du Propriétaire Et Instructions D'installation

Exterior Surfaces

Control Knobs

The control knobs may be removed for easier cleaning.
Make sure the knobs are in the OFF positions and pull
them straight off the stems for cleaning. The knobs can
be washed with soap and water. Make sure the insides
of the knobs are dry before replacing. Replace the knobs
in the OFF position to ensure proper placement.
Painted Rangetop Trim
Clean rangetop trim with soap and water or a vinegar
cleaners, cleaning powders, steel wool or harsh
abrasives on any painted surface.

Stainless Steel Surfaces

To clean the stainless steel surface, use warm sudsy
water or a stainless steel cleaner or polish. Always
wipe the surface in the direction of the grain. Follow
the cleaner instructions for cleaning the stainless steel
Friend Soft Cleanser will remove surface rust, tarnish,
of grit and rub in the direction of the brush lines with a
damp, soft sponge.
49-2001154 Rev. 0