A&D Medical LIFE SOURCE UA-651CNBLE Manuel D'instructions page 13

Using the Monitor
To connect with your mobile device - download and install the
A&D Heart Track app:
Follow the instructions in the app to connect.
Check the compatible device list as the following website.
http://www.wellnessconnected.jp/english/compatibility/
Connecting to a mobile device (Pairing)
A Bluetooth device needs to be paired with this blood pressure
®
monitor in order to communicate with that device. If this monitor
is paired with a receiver device from the start, measurement data
is transmitted automatically to the receiver device each time a
measurement is made.
Tips for pairing
• Be sure to turn the power of all other Bluetooth
pairing. Multiple devices cannot be paired at the same time. If
the receiver device cannot receive measurement data, try pairing
once again.
• Communication is possible with one of the receiver devices. If a
second receiver device is paired, the device other than the most
recently connected device will be unpaired to enable the new device
to be paired.
• Follow the steps on the next page to pair the monitor with a
compatible receiver device. Also refer to the manual of
Bluetooth
®
the receiver device. Please use a pairing wizard if one is provided.
devices off when
®
E-12