General Power Tool Safety Warnings - Makita DTL060 Manuel D'instructions

ENGLISH (Original Instructions)
1. Red indicator
2. Button
3. Battery cartridge
4. Star marking
5. Indicator lamps
6. Check button
7. Switch trigger
8. Lamp
9. Reversing switch lever
SPECIFICATIONS
Model
Capacities
No load speed (min
Impacts per minute
Max. fastening torque
Overall length
Net weight
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heaviest
combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING:
• Only use the battery cartridges and chargers listed above. Use of any other battery cartridges and chargers may
cause injury and/or fire.
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
General power tool safety
warnings
WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
All manuals and user guides at all-guides.com
Explanation of general view
10. Bit
11. Sleeve
12. Insert bit
13. Spindle
14. Groove
15. Screw
16. Hook
17. Hex bolt
18. Angle head
Machine screw
Bolt
-1
)
D.C.14.4 V Model BL1415N/BL1430/BL1430B/BL1440/BL1450/BL1460B
BL1815N/BL1820/BL1820B/BL1830/BL1830B/BL1840/
D.C.18 V Model
DC18RC/DC18RD/DC18RE/DC18SD/DC18SE/DC18SF
ENE033-1
GEA010-2
19. Tooth
20. Straight head
21. Ratchet head
22. Standard bolt
23. Fastening torque
24. Proper fastening torque
25. Fastening time (S)
26. High tensile bolt
DTL060
4 mm - 8 mm
4 mm - 12 mm
0 - 2,000
0 - 3,000
60 N•m
387 mm
1.4 - 1.8 kg
D.C. 14.4 V
BL1840B/BL1850/BL1850B/BL1860B
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
CORDLESS IMPACT DRIVER
SAFETY WARNINGS
1. Hold the power tool by insulated gripping
surfaces, when performing an operation where the
fastener may contact hidden wiring. Fasteners
contacting a "live" wire may make exposed metal parts
of the power tool "live" and could give the operator an
electric shock.
DTL061
1.4 - 2.0 kg
D.C. 18 V
GEB137-1
5