Cleaning And Maintenance; Service Address - DURABLE 5089 Mode D'emploi

Exchanging monitor
▶ see figure 11 for # 5089
▶ see figure 23 for # 5090
– Remove the cable clamps (11) and monitor cable.
– Lift the monitor slightly to relieve the clamps.
– Press the clamps (7) of the VESA plate (1) together as shown
and lift the monitor out of the bracket (8).
– Release the VESA plate from the monitor and attach these as
described above to the new monitor.

Cleaning and maintenance

WARNING!
Risk of product damage!
Do not use any abrasive or sharp objects or aggressive
cleaning agents.
Do not use any solvents.
– In order to prevent the movement from decreasing due to dust
deposits, regular dust removal on the monitor bracket is rec-
ommended.
– Wipe the product with a dry or slightly damp microfibre cloth.
– Regularly check the monitor bracket for safety and stability.

Service address

DURABLE
Hunke & Jochheim GmbH & Co. KG
Service
Grünlandweg 1-5
58640 Iserlohn
EN
English
33