Preparation - DURABLE 5089 Mode D'emploi

EN
English
– Screws for mounting monitor (9)
– Covering caps (10)
– Cable clamps (11)
– Dowels and screws for wall mounting (12, 13)
Note:
Please contact our service team if one of the parts are
missing or damaged.
Assembly
DANGER!
Risk of injury!
Before commencing work, check with the relevant devices
whether there are any hidden power lines in the area of
work. If in doubt, ask your power company.
Contact with electrical lines can lead to fire and electric
shock. Damage to a gas line can lead to an explosion.
Damage to a water line leads to major property damage,
or may cause an electric shock.

Preparation

– Take all parts out of the packaging.
– Have a drilling machine and 6 mm drill bit ready.
– Have a spirit level ready.
– Have a pencil ready.
Mounting the wall bracket
▶ see figure 3 for # 5089
▶ see figure 14 for # 5090
– Remove the last page with the drill template from these in-
structions.
– Hold the drill template in the desired position on the wall.
– Align the wall bracket or drill template using the spirit level.
– Draw the drilling holes using the drill template.
30