Philips VisaPure Essential SC527X Mode D'emploi page 13

5.2.3 Skin Zone timer
When you switch on the appliance, it works for three
periods of 20 seconds. Between these periods, there is a
short pause to indicate that you have to move the brush
head to another skin zone.
5.2.4 Auto shut-off
The appliance automatically switches off after one minute
to prevent overtreatment.
5.2.5 Cleansing procedure
Note:
D
You can use the appliance twice a day.
Push the brush head onto the connection pin until it
1
locks into position with a click (Fig. 6).
Moisten the brush head with water or liquid cleanser
2
or apply the cleanser directly on your skin before you
use the appliance. Do not use the appliance with a
dry brush head, as this can irritate the skin.
Place the brush head on your skin.
3
Press the on/off button once to switch on the
4
appliance. The appliance starts to operate at speed 1.
Press twice for speed 2. Press three times to switch off
the appliance or wait until it stops automatically (Fig. 7).
Gently move the brush head across your skin while
5
making circular movements. Do not push the brush
head too hard onto the skin to make sure the
treatment remains comfortable (Fig. 8).
13 13