Wing Inflation - Gong SUPER POWER 2023 Guide De L'utilisateur

❻ - To close the batten tensioner, place the head of
the screw in the groove of the tensioner. Close
and clip the tensioner on the batten..

WING INFLATION

❶ - Firmly screw the lower part of the inflation valve
back on and completely screw the deflation
valve back onto the central strut.
EN
❺ - To increase batten tension, turn the screw anti-
clockwise. Conversely to release the tension.
⚠ - The tension of the batten should not be important.
The supplied battens are of the correct size.
The screw end will be useful to fix the batten in
the sleeve but also to make minor adjustments
to its length. If the tension is too high, the
tensioner may open.
❼ - Once the two LDS battens are inserted, inflate
the wing.
❷ - Unscrew the upper part of the inflation valve and
fix the nozzle of the pump.
- 32