Wing Inflation - Gong PLUS 2023 Guide De L'utilisateur

WING INFLATION

❶ - Unfold the wing with the leading edge facing the wind on a clear non-abrasive or sharp surface, extrado
facing the ground and attached to a fixed point or secured with the pump leash. Attach your wrist leash to
the leash attachment of the wing, only with the velcro attachment of the leash.
❷ - Firmly screw the lower part of the inflation valve
back on and completely screw the deflation
valve back onto the central strut.
EN
❸ - Unscrew the upper part of the inflation valve and
insert the nozzle of the pump.
❹ - The ONE-PUMP is what allows air to go from
the leading edge to the strut. It must be in an
open position when inflating. To open the clamp,
it must be in the same position as in the picture,
and to close it, you must press the clamp until
hearing several clicks, confirming it's closed.
Open the clip of the ONE-PUMP system to allow
inflation of the strut. Never inflate the strut
with the strut's valve but always with the
leading edge's valve
- 25
GONG-GALAXY.COM