Screws; Top Plate Mount; Front Wing Mount - Gong KITEFOIL ALLVATOR Guide De L'utilisateur

SCREWS

GONG ALLVATOR
Your
delivered with a screw/tool kit
for mounting the Foil adapted for
the connection between your
Foil and Board. The Kit for all the
ALLVATOR foils consists of the
following :

TOP PLATE MOUNT

Front
4 x Nuts
4 x Washers
4 x M6-30 mm
TOP PLATE MOUNT
Connect the Mast to the fuselage by using the M6-30 mm screws provided. The thicker part of the mast
should be oriented towards the front of the fuselage. Close tightly.

FRONT WING MOUNT

Insert the front wing fuselage. Use the 2 M6-16 mm screws for fixing. Close tightly.
is
Back
3 x M6-30 mm
EN
4 x M6-16 mm
- Connect the Top US Plate to the mast.
- Use the 3 M6-30 mm screws to fix it into place.
- Close tightly.
- 14
3 x M6-30 mm