Stab Mount; Foil Gong Pro Clear Mount (Option); Top Plate Boardfoil Mount - Gong KITEFOIL ALLVATOR Guide De L'utilisateur

STAB MOUNT

Connect the stab to the fuselage. Use the 2 provided M6-16 mm to fix it. Close tightly.Verify all points of
fixation before using.

FOIL GONG PRO CLEAR MOUNT (OPTION)

TOP PLATE BOARDFOIL MOUNT

Turn your Board over and be sure to have it on a
debris free surface and protect the nose and tail.
Insert the two square nuts into each US Box. Slide
them into place in alignment with the screw holes of
the Top Plate.
ANY QUESTIONS ? Contact our team
https://www.gong-galaxy.com/en/help-contact/
EN
If you have a GONG PRO CLEAR FOIL you have to
fix the 2 screws above the Front Wing and the Stab.
Tighten strongly.
Turn over your Foil that is equipped with the Top
Plate and place it over the US Box. Use the 4
M6-30 mm screws for connecting the Foil to the
Board by screwing them into the square nuts. Verify
all connecting points and be sure they are fully
tightened. Your Foil is ready to use.
- 15
GONG-GALAXY.COM