Controls - NEC Flat Professional Serie Mode D'emploi

Controls

DVI/D-SUB: Allows you to change between the DVI-analog, DVI-digital and
D-SUB signal inputs.
OSM ™ (On-Screen Manager) control buttons on the front of the monitor
function as follows:
EXIT
CONTROL m/n
CONTROL –/+
PROCEED
RESET
NOTE: When RESET is pressed in the main and sub-menu, a warning window will appear
allowing you to cancel the reset function.
When OSM controls are activated, icons are displayed at the top of the menu.
If an arrow ( ) is displayed in a sub-menu, it indicates further choices are
available. To enter a sub, sub-menu, press PROCEED.
Brightness/Contrast Controls
Brightness: Adjusts the overall image and background screen brightness.
Contrast: Adjusts the image brightness in relation to the background.
Degauss: Eliminates the buildup of stray magnetic fields which alter the correct scan of the
electron beams and affect the purity of the screen colors, focus and convergence. When
activated, your screen image will jump and waver a bit as the screen is demagnetized.
Caution: Please allow a minimum of 20 minutes to elapse between uses of the
Degauss Control.
Size and Position Controls
Auto Adjust: Automatically adjusts the horizontal and vertical size and
position settings for applicable signal timings.
Left/Right: Moves the image horizontally (left or right).
Down/Up: Moves the image vertically (up or down).
Narrow/Wide: Decreases or increases the horizontal size of the image.
Short/Tall: Decreases or increases the vertical size of the image.
7A811011.WPC
Main Menu
Exits the OSM menu.
Moves the highlighted
area up/down to select
one of the controls.
Moves the highlighted
area left/right to select
one of the controls.
Has no function.
Resets all the controls within
the highlighted menu
to the factory setting.
6
8
Sub-Menu
Exits to the OSM controls
main menu.
Moves the highlighted area
up/down to select one of the
controls.
Moves the bar in the –/+
direction to decrease or
increase the adjustment.
Only executes control
or enters sub, sub-menu.
Resets the highlighted control
to the factory setting.
5/18/00, 12:26 PM