Installation - turbionaire REVIGO10 Manuel D'instructions

FEATURES
• High Capacity in a compact size with cooling, dehumidifying and fan function.
• Temperature setting and display
• LED Digital display
• Electronic control with built-in timer, sleep mode
• Self-evaporating system for better efficient
• Auto shut off when tank full
• Automatic restart in the event of power outage
• Auto defrosting function at low ambient temperatures
• Remote control
• 2- speed fan
• Casters for easy mobility

4. INSTALLATION

UNPACKING
Unpack the carton and take the appliance and accessories out.
Check the device after unpacking for any damage or scratches on it.
Accessories:
1. Exhaust hose
2. Hose connector
3. Window kit adapter
4. Remote Control
5. Window kit
6. Drain pipe
Choose your location
• If tipped more than 45°, allow the unit to set upright for at least 24 hours before start up.
• Place the unit on a firm, level surface in an area with at least 50cm of free space around it
to allow for proper air circulation.
• Do not operate in close proximity to walls, curtains, or other objects that may block air
inlet and outlet. Keep the air inlet and outlet free of obstacles.
• Never install the unit where it could be subject to：
- Heat sources such as radiators, heat registers, stoves or other products that products
that produce heat.
- Direct sunlight
- Mechanical vibration or shock
- Excessive dust
- Lack of ventilation, such as cabinet or bookcase
- Uneven surface
Install the unit in rooms which exceed 10 m². Do not install the
unit in a place where inflammable gas may leak.
WARNING!
The manufacture may provide other suitable example or may
provide additional information about the refrigerant odour.
NOTE!
9