AERMEC ANKI 020 Manuel D'utilisation page 23

START-UP
When the unit is under power, the panel is illuminated and it is possible to access the various menus. Before starting-up
we recommend:
1) Set the required season using this user parameter menu (U00). The main template displays the symbol 6 for the season set
2) Set the setpoint temperature through the user parameter menu (U01) for cold and (U03) for hot
3) Press the ENTER button for 3 sec . The unit switches ON. The symbol 1 appears on the display.
4) The main template displays the outlet water temperature and the current setpoint
Example of how to navigate and set parameters with the user interface:
1) Press the MENU button
2) Scroll using the arrow buttons to the menu required
3) Press the ENTER button to access the menu
4) Scroll using the arrow buttons to the parameter required
5) Press the ENTER button to select the parameter
6) Use the arrow buttons to modify the parameter
7) Use the ENTER button to confirm the change to the parameter setting
8) Press the ESC button to return to the main template
For more details about menus and parameters, refer to the tables in this manual
Press once: Display the alarm of the alarm chronology
Alarm Button:
Press for 3 sec: Reset
Menu Button
Esc button
6
Scrolling button:
- Navigation and changing parameters
Press once:
- Go to menu
- Go to parameter
Enter Button:
- Confirm parameter
Press for 3 sec:
- Machine On/Off
Scrolling button:
- Navigation and changing parameters