Gas Safety - Samsung NY63 875 Serie Manuel D'installation

Masquer les pouces Voir aussi pour NY63 875 Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

GAS SAFETY

WARNING
To reduce the risk of fire, electric shock, personal injuries, and/or death, obey the
following precautions.
If you smell gas:
Close the valve and do not use the range.
Do not light a match, candle, or cigarette.
Do not turn on any gas or electric appliances.
Do not touch any electrical switches or plug a power cord into an outlet.
Do not use any phone in your building.
Evacuate the room, building, or area of all occupants.
Immediately call your gas supplier from a neighbor's phone. Follow the gas
supplier's instructions.
If you cannot reach your gas supplier, call the fire department.
Checking for gas leaks
Leak testing of the appliance shall be conducted according to the
manufacturer's instructions. Do not use a flame to check for gas leaks. Use a
brush to spread a soapy water mixture around the area you are checking. If
there is a gas leak, you will see small bubbles in the soapy water mixture at
the leak point.
Install_NY63T8751S_DG68-01305A-01_EN+CFR.indb 5
ELECTRICAL AND GROUNDING SAFETY
WARNING
To reduce the risk of fire, electric shock, personal injuries, and/or death, obey the
following precautions.
Do not modify the power plug, power cord, or power outlet in any way.
Do not put a fuse in a neutral or ground circuit.
Use a dedicated 240-volt, 60-Hz, 40-amp, AC, fused electrical circuit for this
range. A time-delay fuse or circuit breaker is recommended. Do not plug more
than one appliance into this circuit.
Do not connect the ground wire to plastic plumbing lines, gas lines, or hot
water pipes.
This range must be Earth grounded. In the event of a malfunction or
breakdown, grounding will reduce the risk of electrical shock by providing
a path for the electric current. This range is equipped with a cord having
a grounding plug. The plug must be firmly plugged into an outlet that is
properly installed and grounded in accordance with the local codes and
ordinances. If you are unsure whether your electrical outlet is properly
grounded, have it checked by a licensed electrician.
Electrical service to the range must conform to local codes. Barring local
codes, it should meet the latest ANSI/NFPA No. 70 – Latest Revision (for the
U.S.) or the Canadian Electrical Code CSA C22.1 – Latest Revisions.
It is the personal responsibility of the range owner to provide the correct
electrical service for this range.
Plug into a grounded 3-prong outlet.
Do not remove the ground prong.
Do not use an adapter or an extension
cord.
Do not use a damaged power plug,
power cord, or loose power outlet.
English 5
2020-07-20
4:47:21

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ny63t8751s

Table des Matières