Publicité
Instructies Instructions Conseils de montage Einbauanleitung Upute za montažu
EN
First choose the corner location where you want to install your LoooX Corner Shelf.
It is important to check in advance how the LoooX Corner Shelf can or will be installed.
Of course, the LoooX Corner Shelf must be installed in a corner. And, the corner angle must be
90º degrees. You decide how high.
Make sure the joints of your tiles align with each other in the corner. This is because the LoooX
Corner Shelf will be supported by your tiles.
For existing tiling: At the location where you want to install the LoooX Corner Shelf, remove
For new tiling:
When ready to install the shelf, fill the empty joints with sufficient grout (preferably a sanitary
grout seal). Position the LoooX Corner Shelf in the joints filled with grout and gently push the
Corner Shelf into place. Let the Corner Shelf on the tiles sink down in the joints and then finish
the edges (top and bottom) with grout (preferably a sanitary grout seal).
Your LoooX Corner Shelf is ideal for your bathroom even in the wet area.
The weight that your LoooX Corner Shelf can hold is dependent on the thickness of the tiles.
Maximum: 1.5 kg.
Tip: Install your LoooX Corner Shelf at hand level for maximum convenience.
Small irregularities may appear on sprayed products. It is not possible to file a
claim for these irregularities. We recommend that you do not place products with a
corrosive or aluminium bottom on the stainless steel shelf.
24
CORNER SHELF
the grout between your tiles. Note: do not remove too much grout.
Make sure the joints remains empty at the location you want to install the
Corner Shelf.
Publicité
