Philips Senseo HD7857/20 Mode D'emploi page 6

Tilt the water reservoir and place the bottom
3
back onto the machine (1). Then press the top
of the water reservoir towards the machine (2).
Slide the milk spout onto the machine. Make
4
sure you attach the milk spout by sliding it
over the guiding rails on the coffee spout. You
hear a click sound when the spout is attached
properly.
Place a bowl with a capacity of at least 1 litre
5
under the coffee spout.
Make sure a pod holder, without pod or pods,
6
is in place.
6
Put the plug in an earthed wall socket.
7
Press the on/off button. The button lights up
8
to indicate that you have to flush the machine.
To start flushing, press any of the recipe
9
buttons.
During the flushing cycle, the boiler fills itself
•
with water from the water reservoir and
cold water comes out of the coffee spout.
During the flushing cycle, the machine
produces more noise than during a regular
brewing cycle.