Technical Data; Power Supply - QEO FHM 20 Mode D'emploi

Technical Data

Measuring principle
Measuring range: Wood
Accuracy: Wood
Measuring range: Building materials
Accuracy: Building materials
Measuring range: Temperature
*average adjustment for European wood at 20°C
· CHARACTERISTICS
·
· Moisture meter for wood and building materials
· Wood: calibrated for 170 wood types in 8 groups
· Building materials: gypsum, concrete, mortar, plaster, plasterboard, paper, ...
· Measurement of moisture permeation, surface humidity, determination of dry and humid areas
· External moisture measurement probe
· External temperature measurement probe
· Replaceable 8 mm measuring pins
· Protective cap with integrated calibration tester
· Battery status indicator
· Automatic power off (adjustable timer)
NOTE
Measurements using the external moisture and temperature probes are automatically temperature
corrected. This ensures a higher accuracy.

POWER SUPPLY

Open the battery compartment cover on the reverse side and insert 2 x AAA batteries (ensure correct
polarity). Close the battery compartment cover.
If the battery status indicator starts to "blink" the batteries need to be re-placed.
Electrical resistance
6 to 99,9 %
±1 %*
3 to 33 %
±1 %
0 to 60°C
EN
B
13