Refilling The Water Reservoir - Beko SPA9130B Manuel D'utilisation

2 Operation
2.1 Intended use
This appliance is intended only for household use
and ironing; it is not suitable for professional use.
2.2 Initial use
Remove the protective film on the LED screen (3).
During initial use, fill the water reservoir and va-
porize the water to remove the manufacturing
residues. Meanwhile, use shock steam button (6)
frequently.
You can smell a mild odour or see
white sediments coming out of the
soleplate holes during initial use.
C
After performing vaporizing process
twice, such odours and sediments
will disappear. Also water droplets
may form within the water reservoir;
this is normal.

2.3 Refilling the water reservoir

WARNING: Do not fill the water
A
reservoir (8) with perfume, vinegar,
laundry starch, calc-cleaners or oth-
er products or chemicals which can
facilitate the ironing process.
Your appliance is suitable for using
C
with tap water. If your tap water is
excessively hard, we recommend
you to use a mixture of tap water
and potable water.
14
2.4 Temperature setting and dry
ironing
When setting the temperature of the appliance,
consider the following table.
Fabric Temperature
Type Setting
Silk ECO-SMART
Wool SMART
Cotton SMART-MAX
Linen-
SMART-MAX
Jean
A
WARNING: Take the ironing instruc-
tions specified on the label of the
fabric into consideration for ironing.
• Your appliance starts in "SMART"
mode when it is switched on.
• You can safely iron all fabrics suit-
able for ironing in "SMART" mode.
• If you don't know the fabric of your
garment, first iron an invisible part
C
of your garment and determine a
correct ironing temperature for it.
• In order to prevent the bright
stains that may form on the syn-
thetic fabrics such as silk, iron on
the reverse side of the fabric. Do
not use the water spraying feature
in order to prevent the stain for-
mation.
Steam
Setting
With/Without
Steam
With/Without
Steam
With/Without
Steam
With/Without
Steam