Environment Safety - ATOMSTACK A5 Mode D'emploi

2.3 Material safety
Do not engrave materials with unknown properties.Materials Recommended:Wood, bamboo, leather, plastic, fabric, paper, opaque
acrylic, glass.Materials not recommended:Metal, precious stones, transparent materials, reflective materials etc.
2.4 Use Safety
Use the engraver only in horizontal position and ensure that it has been securely fixed to prevent fires caused by accidental shifting or
dropping from the workbench during work.It is forbidden to point the laser to people, animals or any combustible object, whether it is
in working condition or not.
2.5 Power safety
To prevent accidental disasters such as fire and electric shock, the Engraver provides a power adapter with a
ground wire. Plug the power plug into the power socket with a ground wire when using the Laser Engraver.

2.6 Environment safety

Please ensure the workplace must be cleared while assembling engraving and cutting no flammable or explosive materials surrouding
the equitment. Have to set a metal plank under the bottom while engraving or cutting.