Télécharger Imprimer la page

CIAT COMFORT LINE I Manuel D'instructions page 35

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
Thank you for purchasing a CIAT unit. We trust that this unit will give you complete
satisfaction.
To ensure correct operation, all connections (electrical, hydraulic, etc.) must be made
in accordance with industry practice and the regulations in force in the country of use.
Your unit must be maintained and installed as recommended in this manual.
Each unit bears a data plate. Include the reference number shown on the data plate in
all correspondence.
delivered.
the delivery note in the presence of the delivery driver before the delivery note is
signed.
: In accordance with Article 133 of the French Code of Commerce,
these claims must be reported to the carrier by registered letter within three
business days of receipt. The terms "conditional" and "pending unwrapping" shall
have no value. The client must unwrap the goods in the presence of the driver.
Claims must be made at the time of delivery and be described in detail.
For your safety, wear protective gloves
Important: the unit must be handled with care and kept flat. Impacts may cause
damage to the frame or the body of the unit and adversely affect its main functions and
its appearance.
The unit should preferably be lifted by its mounting holes (Fig.1-m) and
condensate pan or the collars. It is possible to carry out the installation using a fork-lift
truck, as long as care is taken not to damage the unit.
The unit is placed inside the suspended ceiling. If the return has no duct, ensure that
the rear of the unit is at a sufficient distance from the wall (X = min. 250 mm).
a - Fan motor assembly access panel
and filter
b- Filter runner
c - Supply air collars
d - Header couplings
e - Coil lower access panel
f - Exchanger coil
g - Air bleed and drain valves
h - Fan motor assembly
i - Electrics box
j - Condensate drain pan
k - Condensate drain pump
l - Condensate drainage
m - Oblong mounting hole Ø12 x 30 mm
n - Air filter
o - Fresh air inlet knockout (opposite
side to electrics box)
p - Resilient mount
q - Return air grille
EN - 1
EN
by the
NA 12.48 F

Publicité

loading

Ce manuel est également adapté pour:

Comfort line yComfort line hComfort line u