Publicité
Les langues disponibles
Les langues disponibles
Stroller Operation
Adjust Backrest
see images
-
14
15
There are 5 recline angles for the backrest.
Recline Backrest
To recline the backrest, squeeze the recline handle on the
back of the seat, pull down on the backrest.
Raise Backrest
To raise the backrest, push up.
!
Make sure the recline is set properly for use.
!
The maximum load of storage pocket on the back of
backrest is 0.45kg.
Use Buckle
see images
-
16
17
Release Buckle
Press the button, the buckle will release automatically.
Lock Buckle
Match the waist belt buckle with the shoulder buckle
and align them with the center buckle, the buckle can lock
automatically.
- 2
A "click" sound means the buckle is
17
locked completely.
- 3
17
!
To avoid serious injury from falling or sliding out, always
secure your child with harness.
!
Make sure your child is snugly secured. The space between
the child and the shoulder harness is about the thickness of
one hand.
!
Do not cross the shoulder belts. This will cause pressure on
a child's neck.
21
14
15
16
-
1,
17
Use Shoulder & Waist Harnesses
see images
-
18
21
!
In order to protect your child from falling out, after your child
is placed into the seat, check whether the shoulder and
waist harnesses are at proper height and length.
- 1
Shoulder harness anchor
18
- 2
Slide adjuster
18
For larger child, use shoulder harness anchor and the highest
shoulder slots. For smaller child, use shoulder harness anchor
and the lowest shoulder slots.
!
The position of the shoulder belt anchor can be adjusted
from above opening which closed by fasterners or below
pocket.
- 1
19
To adjust the position of the shoulder harness anchor, turn the
anchor to be level with the side facing forward. Thread it
through the shoulder harness slot from back to front.
Rethread it through the slot that is closest to child's shoulder
height.
20
Use slide adjuster to change the harness length.
Press the button
-
2, while pulling the waist harness to
21
proper length.
- 3
21
Adjust Calf Support
see images
-
22
23
The calf support has 2 positions.
To raise the calf support, push it upwards.
means the calf is locked completely.
To lower calf support, press the adjustment buttons on both
sides of the calf support
23
downwards.
- 2
23
19
- 1
21
A "click" sound
22
-
1, and rotate the calf support
22
Publicité
