Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Install batteries in wireless accessories
If no wireless accessories are being connected, skip to step 13.
Outdoor air sensor
(optional; steps 8–9)
M28800
Connect Wireless Accessories: Outdoor Sensor and Portable Comfort
Control
Next
MCR32403
Done
MCR32404
Install 2 fresh AA
lithium batteries
2-wire Prestige® IAQ and RF EIM
6. Press NEXT to connect the
Prestige IAQ thermostat to the
Equipment Interface Module
(EIM).
7. Press Done. Thermostat will
advance to the Home Screen.
Portable Comfort Control
(optional; steps 10–12)
8. Press and release the CONNECT
button on the Wireless Outdoor
Sensor.
9. Check thermostat to verify that
the outdoor sensor is working.
After about 15 seconds, the
thermostat should display outdoor
temperature and humidity.
7
Install 3 fresh AA
batteries
M29863
69-2445EFS—03
Publicité
Table des Matières
