Noise And Vibration - Flex L 3309 FRG Notice D'instruction D'origine

Angle grinder
Additional safety instructions
The mains voltage and the voltage

specifications on the rating plate must
correspond.
Do not press the spindle lock until the

grinding tool stops.

Noise and vibration

The noise and vibration values have been
determined in accordance with EN 60745.
L 3309 FRG:
The A evaluated noise level of the power
tool is typically:
– Sound pressure level:
– Sound power level:
– Uncertainty:
Total vibration value
(when sanding surfaces)
– Emission value:
– Uncertainty:
L 3406 VRG:
The A evaluated noise level of the power
tool is typically:
– Sound pressure level:
– Sound power level:
– Uncertainty:
Total vibration value:
– Emission value when ...
Surface grinding:
Sanding with sanding
sheet:
Polishing:
– Uncertainty:
CAUTION!
The indicated measurements refer to new
power tools. Daily use causes the noise and
vibration values to change.
84 dB(A);
95 dB(A);
K = 3 dB.
2
a = 7 m/s
h,AG
2
K = 1.5 m/s
84 dB(A);
95 dB(A);
K = 3 dB.
2
a = 6.0 m/s
h,AG
2
a = 3.6 m/s
h,DS
2
a = 4.5 m/s
h,P
2
K = 1.5 m/s
NOTE
The vibration emission level given in this
information sheet has been measured in
accordance with a standardised test given
in EN 60745 and may be used to compare
one tool with another. It may be used for
a preliminary assessment of exposure.
The declared vibration emission level
represents the main applications of the tool.
However if the tool is used for different
applications, with different accessories or
poorly maintained, the vibration emission
may differ. This may significantly increase
the exposure level over the total working
period.
However if the tool is used for different
applications, with different accessories or
poorly maintained, the vibration emission
may differ. This may significantly decrease
the exposure level over the total working
period.
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and the
accessories, keep the hands warm,
organisation of work patterns.
CAUTION!
Wear ear protection at a sound pressure
above 85 dB(A).
17