10 Insert the wall anchors.
It is recommended that you use the
wall anchors included in the box to
mount your thermostat.
You can use the UWP to mark where
you want to place the wall anchors.
Tip: Use a 7/32 drill bit.
11 Bundle and insert wires through
the UWP.
Gather the wires and guide them
through the hole in the middle of the
UWP.
Make sure at least 1/4-inch of each
wire is exposed for easy insertion
into the wire terminals.
33-00151EF_A.indd 11
All manuals and user guides at all-guides.com
11
6/24/2016 4:20:33 PM