Honeywell Lyric T5 Guide D'installation Rapide page 12

12 Set R-switch position.
Set the R-switch up or down based on your wiring notes in Step 7.
If you have one R wire (labeled R, RH, or Rc ), then set the R-switch to the up
position (1 wire) and insert that wire into the R terminal.
If you have two R wires (one labeled R or RH and the other labeled Rc), then set
the R-switch to the down position (2 wires), insert the R or RH wire into the R
terminal, and insert the Rc wire into the Rc terminal.
UWP Mounting System
R-Switch
33-00151EF_A.indd 12
All manuals and user guides at all-guides.com
If you checked Set the R-Switch
R (only)
R (only)
C
R (only)
H
R
R
C
R
H
R
C
12
Insert Wire(s) into Terminal(s
R wire
R
Rc
R wire
C
R
Rc
R wire
H
R
Rc
R wire
R
R wire
C
Rc
R wire
H
R
R wire
C
Rc
6/24/2016 4:20:33 PM