Customer Service - AEG IDE84243IB Prescriptions De Montage Et Mode D'emploi

INFORMATION CODE
E2
ERR03
+
acoustic signal
For all other error
signals
( E ... U ... )

5.3 Customer service

Before contacting Customer Service
1. Check that you cannot solve the problem yourself based on the points described in "Troubleshooting".
2. Switch the device off and on again to see if the problem resolves itself.
If the fault persists after the above checks, contact the nearest Customer Service.
5.2 Troubleshooting
DESCRIPTION
The command zone switches off due to
an excessively high temperature
Continuous (permanent) key activation
is detected. The interface switches off
after 10 seconds.
Call customer service and report the error code
POSSIBLE CAUSES
The temperature inside
the electronic parts is too
high
Water, pots or kitchen
tools are on top of the
user interface.
78
SOLUTION
Wait for the hob to cool
before reusing it
Clean the surface,
remove any objects from
the surface.