Samsung MX-ST50B Manuel page 21

Masquer les pouces Voir aussi pour MX-ST50B:

Les langues disponibles

Connecting a mobile device via Bluetooth

When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of

* In battery mode, when the Sound Tower is power off, Bluetooth connection and the party audio app are

not available.

The initial connection

1. Press and hold the

"BT PAIRING" mode.

2. On your device, select "[AV] MX-ST5B Series" from the list that appears.

• After the device is connected. The third light on the top panel blinks three times cyan, and the

bluetooth light on the rear panel is steady on.

3. Play music files from the device connected via Bluetooth through the Sound Tower.

If the device fails to connect

• Sound tower will play voice prompt via bluetooth disconnected.

• If a previously connected Sound Tower listing (e.g. "[AV] MX-ST5B Series") appears in the list, delete

• Then repeat steps 1 and 2.

What is the difference between BT READY and BT PAIRING?

• BT READY : In this mode, you can use the previously connected TV or mobile device to connect to

Sound Tower.

• BT PAIRING : In this mode, you can connect a new device to the Sound Tower.

(Press and hold the

PAIRING button on the rear of the Sound Tower to enter the "BT PAIRING" mode.)

PAIRING button on the remote control for more than 5 seconds to enter the

PAIRING button on the rear panel.

PAIRING button on the remote control for more than 5 seconds or press the