Publicité
Les langues disponibles
Les langues disponibles
Rear Panel of the Sound Tower
AUX 1
Bluetooth
PAIRING
ADD STEREO
GROUP PLAY
USB
ECHO
VOL
MIC
GROUP PLAY
OUT
Terminals
GROUP PLAY
IN Terminals
AUX1
Power
USB
MIC
VOL
ECHO
(5V 2.1A)
POWER
Press the
PAIRING button to enter pairing mode, "PAIRING" LED on the rear plane
will be fast blink.
Press the ADD STEREO button to connect to another same model Sound Tower
wirelessly.
Press the GROUP PLAY button to connect up to ten Sound Tower systems wirelessly.
Connect a USB device to the USB ports on the main unit.
If you connect your cell phone to the USB port, you can charge it.
• Press the
(Source) button to select USB.
You can give an echo effect to the sound from a connected microphone (MIC) by
adjusting the ECHO knob.
Use the VOL knob to adjust the volume of a connected microphone (MIC).
Connect your microphone to the MIC jack.
Use an Audio Cable (not supplied) to connect GROUP PLAY (OUT) terminals on the
main unit to Audio In on an external analogue output device.
Use an Audio Cable (not supplied) to connect AUX2(IN) terminals on the main unit to
Audio Out on an external analogue output device.
Use an Audio (AUX) Cable (not supplied) to connect AUX1 jack on the main unit to
Audio Out on an external device.
Connect the power cord to the Power jack and connect the other end of the power
cord to a wall socket to supply electrical power to the Sound Tower.
AUX 1
MIC
VOL
ENG - 3
USB
(5V 2.1A)
ECHO
Publicité
