Steelcase Bassline ROUND Directives D'assemblage page 11

®
Bassline MYO (Make it Your Own)
Assembly Instructions
1.
Place the user side of your custom top on a
clean surface.
2.
Clean underside of custom top in accordance
with 3M™ guidelines.
www.3m.com Part Number: SJ3526N & SJ3527N
3.
Measure and trace your MYO platform onto the
underside of your custom top (see requirements below).
4.
Lift and flip MYO platform right-side up and
remove backing from 3M™ loop fastener.
5.
Align and adhere the MYO platform onto your
custom top.
Requirements for your Bassline MYO Table
• Overhang
o Your custom top may not have any edge extend more than 7" (178mm) in any
direction from the MYO platform for Square, Rectangle, Oval and
Racetrack tables.
o Your custom top may not have any edge extend more than 4" (102mm) in any
direction from the MYO platform for the Round table.
• Fully assembled MYO tables support a maximum weight of 800 lbs (363kg).
This includes the weight of your custom top and any items
put on the table.
• Your custom top must be secured to the Bassline MYO platform
using the provided 3M™ Hook and Loop fasteners.
3
2
Step C: Step D:
Apply tape to surface Roll finished joint
4
5
Page 11 of 14
P/N 1072876001
Doc # 81395 Rev G