Warranty - Graco 127650 Mode D'emploi

THIS DOCUMENT IS THE TEMPLATE FOR THE EC-DECLARATION OF CONFORMITY THAT IS LOCATED IN MANUAL 333469. THE MANUAL IS
EN
THE PARENT DOCUMENT AND THIS DOCUMENT IS FOR REFERENCE ONLY.
DO NOT SEND THIS DOCUMENT WITH THE ASSEMBLY. IT IS ON THE ASSEMBLY BOM FOR DOCUMENT CONTROL ONLY.
IF THIS DOCUMENT IS CHANGED THE MANUAL MUST BE CHANGED ALSO.
PDM VIEWABLE SHOULD SHOW THIS NOTE, THE PDF FOR THE MANUAL SHOULD NOT HAVE THIS NOTE.
ISO 9001 Registered
Model
DEF METERED NOZZLE
Part
Complies with UK Statutory Instruments:
2016 No. 1091 Electromagnetic Compatibility Regulations 2016
2012 No. 3032 Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
Regulations 2012
Standards Used:
EN 63000
UK Approved Body
Approved By:
Hans van Cranenbroek
Operations Director - EMEA
Manufactured By:
GRACO INC.
th
88 - 11 Avenue N.E.
Minneapolis, MN 55413
USA
This declaration of conformity is issued under the sole responsibility of the manufacturer.
FCD-0213C – Rev. 20
24
GREAT BRITAIN (UKCA)
DECLARATION OF CONFORMITY
127650
Responsible Person:
Graco Ltd.
Central Square 5
29 Wellington St
Leeds, England
LS1 4DL
06MAY2021
th
Floor
199510
K
M0303