Cleaner Maintenance; Filter Maintenance - Hoover MULTI FUNCTION PRO Mode D'emploi

important: Do not use the mini turbo nozzles on rugs with long fringes, animal hides and
carpet pile deeper than 15mm. Do not keep the nozzle stationary while the brush is rotating.

CLEANER MAINTENANCE

removing and replacing the dust bag
1. Switch off the product.
2. The hose connector must be removed before the dust bag can be removed.
3. Release the securing latches and remove the top cover.
4. The dust bag collar is removed by pulling the collar vertically, for hygiene the bag collar
has a closure feature to contain the dust, ensure this is closed.
5. Fit a new bag by sliding the collar into the slots inside the tank, ensuring the collar closure
is at the top [9].
Emptying the liquid collection tank
1. Switch off the product.
2. Release the securing latches and remove the top cover.
3. Using the internal handle, empty the liquid to a suitable source [8].

Filter maintenance

1. Both filters can be washed with warm soapy water but must be dried completely before
re-use, Hoover recommend a period of 24 hours.
2. To remove the pre-motor filter simply slide the filter from the floater cage [6].
3. To replace the pre-motor filter simply slide the filter onto the floater cage until it is
completely covered by the filter.
USER CHECKLIST
Should you have a problem with the product, complete this simple user checklist before calling
your local Hoover service.
• I s there a working electricity supply to the cleaner? Please check with another electrical
appliance.
• I s the bag/container full? Please check the product.
• I s the filter blocked? Please refer to "Filter maintenance" section for cleaning instructions.
Multifunction_Pro__3-8_union.indd 7
7
GB
23-04-2010 14:10:27