Sony Bravia KDL-46R470A Mode D'emploi page 6

x For KDL-46R470A/40R470A/32R420A
Thick and soft cloth
• Be careful not to hit the Table-Top Stand against
the edge of the surface when attaching it.
• Hold the Table-Top Stand with one hand to
avoid it dropping when attaching.
6
GB
• Do not put stress on the LCD panel or the frame
around the screen.
• Be careful to not pinch your hands or the AC
power cord when you install the TV set to the
Table-Top Stand.
• This TV is very heavy, so two or more people
should place the TV onto thick and soft cloth.
• If using an electric screwdriver, set the
tightening torque at approximately 1.5 N·m (15
kgf·cm).
• Be sure to securely tighten the supplied screws,
otherwise the TV may fall down.
• Use an appropriate screwdriver to attach the
screws tightly without damaging the screw
head.
• Please ensure the AC power cord is away from
the stand installation location when you attach
the Table-Top Stand.
• When detaching the Table-Top Stand, reverse
the attaching procedure. Do not remove any
screws other than those used when attaching
the Tale-Top Stand. Do not power on the TV with
its LCD panel facing down to avoid uneven
picture uniformity.